Medium-intensity Type A L865 Aviation Obstruction Light
Details:
Compliance
ICAO Annex 14 Volume 1, Sixth edition, 2013, table 6.3 Medium Intensity Type A Obstruction Light
FAA L-865
Features
Electrical
CREE ultra high intensity LED as light source saving power consumption and maintenance than incandescent light or halogen lamp
Power supply available in DC(12V, 48VDC) or AC(110-240VAC)
Physical
Unique design and UV protected polycarbonate lens for converging light
UV protection Powder coated bright yellow color base make better visibility
Base material is die casting aluminum which has strong corrosion resistance, Shock and Vibrations protection
Special valve installed beside the base to make sure the air could go through but water is avoid, so that the whole light temperature won’t be high.System design
Built-in photocell for day/night operation(dusk to dawn operation)
Surge and lightning protection
Optional
Alarm contact for remote monitoring
Infrared LED for pilot using NVG
GSM cellphone monitoring
RS485 communication part for monitoring
User adjustable flashing rate(40, 50, 60 flashes/minute)
GPS synchronization
Application
AH-MI-A2 medium-intensity light is used on the top of the High-rise Building, High Chimney, marking towers (Telecom, GSM, Microwave & TV), High Pole, Tower Crane, Wind Turbine, etc when the obstacle height is 105-150meter, and most time work with low intensity aircraft warning lights & medium intensity aircraft warning light type B light installed on the lower place.
Parameters:
| SPECIFICATIONS | AH-MI-A2 Medium-intensity Type A Aviation Obstruction Light |
| Light Characteristics | |
| Light Source | CREE high intensity LED |
| Available Colors | White |
| Intensity(cd) | ≥20,000cd(Daytime) |
| 2,000cd(Night) | |
| Horizontal Output(degrees) | 360 |
| Vertical Divergence(degrees) | 3 |
| Flash Characteristics | 40-60 flashes per minuite |
| Operation Mode | 24hours operation |
| LED Life Experience(hours) | >100,000 |
| Electrical Characteristics | |
| Operating Voltage | DC(12V, 48V) or AC(110-240VAC) |
| Power(W) | 20W |
| Circuit Protection | Integrated |
| Physical Characteristics | |
| Body Material | Polycarbonate |
| Base Material | Die-casting aluminum |
| SPECIFICATIONS | AH-MI-A2 Medium-intensity Type A Aviation Obstruction Light |
| Mounting | 190×190×θ12 |
| Dimension(mm) | 229×229×168 |
| Weight(kg) | 3 |
| Product Life Expectancy | 10 years Plus |
| Environmental Factors | |
| Humidity | 0%-100% |
| Wind Speed | 80m/s |
| Waterproof | IP66 |
| Compliance | |
| ICAO | Annex 14 Volume 1,'Aerodrome Design and Operations’ Sixth edition 2016, table 6.3 Medium-intensity Type A White Obstacle Light |
| FAA | L-865 |
| Options Available | |
| GPS Sync Flashing | Powder-coated color |
| Dry Contact alarm (NO COM NC) | NVG(Night Vision Goggles) compatitble LED |
| User adjustable flashing rate (40, 50, 60) | GSM Monitoring |
Anhang Technology(HK) Company Limited
all rights reserved © ICP:12060043